Safety and compliance guidelines
This section provides essential safety information, operating conditions, and compliance guidelines for the proper use and handling of all Swabian Instruments Time Tagger devices. Please review this section carefully before installation, operation, or maintenance of the device.
Symbols
|
Caution: general warning |
|
Caution: high voltage |
|
Functional earth |
Operation environment
The Time Tagger is designed for operation in a clean and dry indoor laboratory environment by qualified personnel. The product or its external components shall not be exposed to corrosive and/or flammable substances, liquids, or extreme heat. Do not operate with high dust and humidity levels.
Parameter |
Value |
|---|---|
Temperature |
+5 °C to +45 °C |
Relative humidity |
< 80 %, no condensation |
Maximum altitude |
2000 meters |
Protection level |
IP 20 (IEC 60529) |
Electrostatic-sensitive device
The Time Tagger is a sensitive electronic device and must be handled with care. The input and output circuitry of the Time Tagger may be damaged by an electrostatic discharge, or their functionality may be impaired. Take appropriate precautions to minimize the risk of an electrostatic discharge into the connections or signal wiring during the installation and operation of the Time Tagger.
|
The Time Tagger is sensitive to electrostatic discharge! Take appropriate protective measures when performing system installation or maintenance. |
Cleaning
Before cleaning the Time Tagger, please make sure that it has been switched off and disconnected from all electrical connections. Clean the outer housing with a soft, lint-free dust cloth. No parts of the Time Tagger may be cleaned with chemical cleaning agents.
Disposal and recycling
|
Never dispose of the Time Tagger with the household waste. Please inform yourself about the local rules for the separate collection of electrical and electronic products. |
Contact, support and service
Swabian Instruments GmbH can be reached directly via phone, email or per post.